Order Products : sales@su-jiao.com

NuSil MED3-4013

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	yVDtmm_NuSil-MED3-4013.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Restricted Healthcare Silicones Definition: NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. Silicone adhesives are elastomers or pressure sensitive adhesive systems that are designed to bond silicone surfaces to each other and to other substrate surfaces such as metals and plastics. There are one-part and two-part adhesives, ranging in consistency from flowable to non-flowable (non-slump). In general, silicone adhesives adhere well to substrates such as glass, aluminum, titanium, other silicones, and some ceramics. While various types of materials can be used as adhesives, silicones are consistently chosen for their many inherent properties and overall versatility. Comments: RTV, FAST CURE, HIGH EXTRUSION RATE

Message

Restricted Healthcare Silicones Definition: NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.

Silicone adhesives are elastomers or pressure sensitive adhesive systems that are designed to bond silicone surfaces to each other and to other substrate surfaces such as metals and plastics. There are one-part and two-part adhesives, ranging in consistency from flowable to non-flowable (non-slump).

In general, silicone adhesives adhere well to substrates such as glass, aluminum, titanium, other silicones, and some ceramics. While various types of materials can be used as adhesives, silicones are consistently chosen for their many inherent properties and overall versatility.

Comments: RTV, FAST CURE, HIGH EXTRUSION RATE

General Information
Features	Biocompatible Fast Cure Good Chemical Resistance Moisture Resistant Room Temperature Vulcanizing
Uses	Adhesives Medical/Healthcare Applications Sealants
Agency Ratings	USP Class VI

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Density	1.12	g/cm³
Curing Time (23°C)	24	hr
Pot Life (25°C)	120	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	20
Tensile Strength	6.89	MPa
Tensile Elongation at Break	800	%
Tear Strength	22.8	kN/m

Resin Grade	Manufacturer	Category	Trademark
RTP 100 GB 30	RTP Company	PP, Unspecified	RTP
DynaMix™ 2944-G	Polymer Dynamix	PPSU	DynaMix™
Hanwha Total PP BJ820T	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP Impact Copolymer	Hanwha Total PP
Petlon R-Prime B3-G30-00-BK	Petlon Polymers Ltd	Nylon 6	Petlon R-Prime
POLYFLAM® RPP 4000	A. Schulman Europe	PP Homopolymer	POLYFLAM®