Order Products : sales@su-jiao.com
EPO-TEK® 310M
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Epoxy Technology Inc. |
| Trademark: | EPO-TEK® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ySlgdb_EPO-TEK-310M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EPO-TEK® 310M is a two component, flexible, optically clear epoxy adhesive designed for optical, semiconductor, and medical applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature 1 | > 30.0 | °C | |
| CLTE - Flow | |||
| -- 2 | 7.8E-5 | cm/cm/°C | |
| -- 3 | 2.2E-4 | cm/cm/°C |
| Optical | Nominal Value | Unit | |
|---|---|---|---|
| Refractive Index 4 | 1.497 | ||
| Transmittance | |||
| 400 to 1300 nm | > 97.0 | % | |
| 1400 to 2200 nm | > 90.0 | % |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 10 | ||
| Part B | Mix Ratio by Weight: 5.5 | ||
| Shelf Life (23°C) | 52 | wk |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Degradation Temperature | 397 | °C | |
| Die Shear Strength - >2 kg (23°C) | 4.69 | MPa | |
| Operating Temperature | |||
| Continuous | -55 to 200 | °C | |
| Intermittent | -55 to 300 | °C | |
| Storage Modulus | 4.16 | MPa | |
| Weight Loss on Heating | |||
| 200°C | 0.090 | % | |
| 250°C | 0.28 | % | |
| 300°C | 0.64 | % |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | |||
| -- 5 | Clear/Transparent | ||
| -- 6 | Clear/Transparent | ||
| Density | |||
| Part B | 1.08 | g/cm³ | |
| Part A | 1.11 | g/cm³ | |
| Viscosity 7(23°C) | 0.45 to 0.85 | Pa·s | |
| Curing Time (65°C) | 2.0 | hr | |
| Pot Life | 150 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 69 | ||
| Lap Shear Strength (23°C) | 2.11 | MPa | |
| Relative Permittivity (1 kHz) | 8.23 | ||
| Volume Resistivity (23°C) | > 1.8E+10 | ohms·cm | |
| Dissipation Factor (1 kHz) | 0.12 |
| Note Message | |
|---|---|
| 1 . | Dynamic Cure 20-200°C/ISO 25 Min; Ramp -10-200°C @ 20°C/Min |
| 2 . | Below Tg |
| 3 . | Above Tg |
| 4 . | 589 nm |
| 5 . | Part B |
| 6 . | Part A |
| 7 . | 100 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| 3M™ Dyneon™ TFM™ Modified PTFE TFM 1700 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ TFM™ Modified PTFE |
| Andur RT 9002 AP/Curene® 107 | Anderson Development Company | PUR-TDI | Andur |
| INSULCAST® RTVS 16 | ITW Polymers Coatings North America | Silicone Rubber, RTV-2 | INSULCAST® RTVS |
| INLUBE PA66GF20TF15 | Infinity LTL Engineered Compounds | Nylon 66 | INLUBE |
| Jampilen HP561S | Jam Polypropylene Company | PP Homopolymer | Jampilen |
