Category: | LDPE , Low Density Polyethylene |
Manufacturer: | LyondellBasell Industries |
Trademark: | Petrothene® |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | ySQf62_Petrothene-NA336149.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Petrothene NA336 is a series of homopolymer resins selected by customers for applications that require thin gauge film constructions. NA336 resins are known for their consistency, excellent drawdown and processability. |
General Information | |
---|---|
Additive |
|
Features |
|
Uses |
|
Agency Ratings |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 0.920 | g/cm³ | ASTM D1505 |
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.5 | g/10 min | ASTM D1238 |
Films | Nominal Value | Unit | Test Method |
---|---|---|---|
Film Thickness - Tested | 32 | µm | |
secant modulus | ASTM D882 | ||
1% secant, MD : 32 µm, blown film | 146 | MPa | ASTM D882 |
1% secant, TD : 32 µm, blown film | 165 | MPa | ASTM D882 |
Tensile Strength | ASTM D882 | ||
MD : Yield, 32 µm, blown film | 17.2 | MPa | ASTM D882 |
TD : Yield, 32 µm, blown film | 13.9 | MPa | ASTM D882 |
Tensile Elongation | ASTM D882 | ||
MD : Broken, 32 µm, blown film | 230 | % | ASTM D882 |
TD : Broken, 32 µm, blown film | 450 | % | ASTM D882 |
Dart Drop Impact (32 µm, Blown Film) | 90 | g | ASTM D1709 |
Elmendorf Tear Strength | ASTM D1922 | ||
MD : 32 µm, blown film | 350 | g | ASTM D1922 |
TD : 32 µm, blown film | 150 | g | ASTM D1922 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Vicat Softening Temperature | 85.0 | °C | ASTM D1525 |
Optical | Nominal Value | Unit | Test Method |
---|---|---|---|
Gloss (45°, 31.8 µm, Blown Film) | 62 | ASTM D2457 | |
Haze (31.8 µm, Blown Film) | 8.0 | % | ASTM D1003 |
Extrusion | Nominal Value | Unit | |
---|---|---|---|
Melt Temperature | 149 - 166 | °C |
Extrusion instructions |
---|
NA 336 has been specifically designed to provide outstanding drawdown at maximum outputs. The melt strength properties of this resin result in excellent bubble stability. This resin can be processed over a wide range of temperatures; however, recommended conditions are melt temperatures between 300°- 330°F (149°-166°C) and a blow-up ratio between 2.0-2.5:1. Using proper techniques and equipment, drawdown to 0.25 mil (6 microns) is feasible at commercial production rates. |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Rotec® ABS HF 3 | ROMIRA GmbH | ABS | Rotec® ABS |
Niform 130 | Soredi S.p.a. | Acetal (POM) Copolymer | Niform |
Celstran® PPS-CF40-01 | Celanese Corporation | PPS | Celstran® |
DURACON® SW-01 | Polyplastics Co., Ltd. | Acetal (POM) Copolymer+PE | DURACON® |
GAPEX® RPP20EA HB | Ferro Corporation | PP, Unspecified | GAPEX® |