Order Products : sales@su-jiao.com
PRIMALLOY® A1900
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | PRIMALLOY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yNWVfO_PRIMALLOY-A1900.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PRIMALLOY® A1900 is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific, Europe, or North America. |
| General Information | |
|---|---|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.12 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 35 | g/10 min | ISO 1133 |
| Molding Shrinkage 1 | Internal Method | ||
| Across Flow : 2.00 mm | 0.70 | % | |
| Flow : 2.00 mm | 0.50 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness | ISO 7619 | ||
| Shore A | 92 | ||
| Shore D | 30 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 15.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 860 | % | ISO 37 |
| Compression Set 2(70°C, 22 hr) | 76 | % | ISO 815 |
| Note Message | |
|---|---|
| 1 . | 120x120x2 mm test plaque |
| 2 . | 6 sheets (each thickness = 2mm) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PC GN5009HF | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| TRIBOFORCE® PEEK C2301 | LEIS Polytechnik - polymere Werkstoffe GmbH | PEEK | TRIBOFORCE® |
| AKROMID® C3 ICF 30 5 XTC black (5473) | AKRO-PLASTIC GmbH | Nylon 66/6 | AKROMID® |
| Flontech® FT-GL15-GR5-6 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Kepital® FL2010 | Korea Engineering Plastics Co., Ltd | Acetal (POM) Copolymer | Kepital® |
