Order Products : sales@su-jiao.com
Hy-Vin® VT575/2
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | INEOS Compounds |
| Trademark: | Hy-Vin® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yMCgHC_HyVinVT5752.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description: Clear flexible, Non-phthalate PVC extrusion compound Colour: Clear and tints Application: Low toxicity, food contact and general purpose extrusions. Specification: Additives used in this compound are listed for food contact use by US FDA + BGA. Material complies with the migration requirements of 2002/72/EC and its amendments Form: Granules |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 1.19 | g/cm³ | BS 2782 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec, 23°C) | 59 | BS 2782 | |
| BS Softness - BSS° | 74 | BS 2782 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cold Flexibility | -44 | °C | BS 2782 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Migration 2 | EN 1186-3 | ||
| 50% Ethanol, 1 hour : 40°C | 2.10 | mg/dm² | EN 1186-3 |
| 50% Ethanol, 10 mins : 40°C | 1.10 | mg/dm² | EN 1186-3 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 3(Yield) | 11.8 | MPa | BS 2782 |
| Tensile Strain 4(Break) | 350 | % | BS 2782 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 130 | °C | |
| Cylinder Zone 2 Temp. | 135 | °C | |
| Cylinder Zone 3 Temp. | 145 | °C | |
| Die Temperature | 150 | °C |
| Note Message | |
|---|---|
| 1 . | Varies with colour |
| 2 . | Material tested to current EC regulations (directive 2002/72/EC and its amendments) using a total immersion method (EN1186, part 3) in 50% ethanol at 40°C for time periods of 10 mins and 1 hour. |
| 3 . | 500 mm/min |
| 4 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PC SC5005T | Sincerity Australia Pty Ltd. | PC+Polyester | Sindustris PC |
| Next Nylon 66 Prime Series PG50-01BK | Next Polymers Ltd. | Nylon 66 | Next Nylon 66 Prime Series |
| ECOMID ARX H GF30 | Nilit Plastics | Nylon 66 | ECOMID |
| Kapex C022 | Ginar Technology Co., LTD. | PC | Kapex |
| Sylvin 8600-90UV Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
