Order Products : sales@su-jiao.com
Alkatuff® 525
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Alkatuff® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yK5kMW_Alkatuff-525.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
525 is a hexene copolymer linear low density polyethylene, designed for high quality cast film applications. 525 is formulated with stabilisation additives, but contains no other additives. 525 is intended for cast film applications such as nappy film. 525 is not recommended for use in outdoor applications (especially applications where there may be prolonged exposure to sunlight, eg. agricultural films) without the addition of appropriate Hindered Amine based Light Stabilisers (HALS). 525 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c), item 3.1. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.5 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 15.2 | MPa | ASTM D882 |
| TD : Yield | 15.2 | MPa | ASTM D882 |
| MD : Fracture | 34.1 | MPa | ASTM D882 |
| TD : Fracture | 28.3 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture | 750 | % | ASTM D882 |
| TD : Fracture | 840 | % | ASTM D882 |
| Dart Drop Impact (Blown Film) | 58 | g | ASTM D1709 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (Blown Film) | 79 | ASTM D2457 | |
| Haze (Blown Film) | 4.2 | % | ASTM D1003 |
| Additional Information |
|---|
| Film properties taken from blown film processed at a blow up ratio of 3.5:1. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULAMID® 66 GF 30 HR | A. Schulman Europe | Nylon 66 | SCHULAMID® |
| NEMCON H PC DP111/X1 | Ovation Polymers Inc. | PC | NEMCON H |
| NuSil MED-6215 | NuSil Technology | Silicone | NuSil |
| Flexathene® TP4346HS | LyondellBasell Industries | Polyolefin, Unspecified | Flexathene® |
| Generic Elastomer, Specialty | Generic | Elastomer, Specialty | Generic |
