Order Products : sales@su-jiao.com

Nylene® 6440 HS

Category:	Nylon 66 , Polyamide 66
Manufacturer:	Custom Resins Group
Trademark:	Nylene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	yGuHDc_Nylene-6440-HS.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

36% mineral reinforced, impact modified, heat-stabilized nylon 6/6

Used in applications where the dimensional stability and added stiffness are desired, but higher impact resistance is also needed

Has the heat and chemical resistance typical of nylon 6/6 materials

Ssuitable for housings and enclosures, brackets and fixtures, and other applications which require this unique set of properties

General Information
Filler / Reinforcement	Mineral, 36% Filler by Weight
Additive	Heat Stabilizer Impact Modifier
Features	Good Chemical Resistance Good Dimensional Stability Good Stiffness High Impact Resistance
Uses	Housings

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.41	g/cm³	ASTM D792
Molding Shrinkage - Flow	1.1	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (23°C)	68.9	MPa	ASTM D638
Tensile Elongation (Break, 23°C)	15	%	ASTM D638
Flexural Modulus (23°C)	4140	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	130	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	174	°C	ASTM D648
Peak Melting Temperature	254	°C	ASTM D3418

Resin Grade	Manufacturer	Category	Trademark
Small Boss RPVC004	Tongxiang Small Boss Special Plastic Products Co., Ltd.	PVC, Rigid	Small Boss
Anjacom® 555-GF17	Almaak International GmbH	ABS	Anjacom®
Panlite® AM-8030	TEIJIN LIMITED	PC+Polyester	Panlite®
Petlon R-Prime A2-G50-00-NT	Petlon Polymers Ltd	Nylon 6	Petlon R-Prime
Deprene 251-60	Shanghai Lin Gen Rubber Materials Co., Ltd.	PP+EPDM	Deprene