Order Products : sales@su-jiao.com
Andur 9000 AS/Curative
| Category: | PUR-TDI , Polyurethane (TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yGQgMB_Andur-9000-AS-Curative.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Andur 9000-AS is a two-component liquid urethane system which can be processed at room temperature to yield an eastomer with a hardness of 90 to 92 Shore A. Andur 9000-AS is recommended where ease of processing is desired. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.08 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 91 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 8.27 | MPa | ASTM D412 |
| 300% strain | 13.8 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 24.1 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 300 | % | ASTM D412 |
| Compression Set | 26 | % | ASTM D395 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Pot Life | 5.0 - 6.0 | min | |
| Thermoset Mix Viscosity (25°C) | 700 | cP | ASTM D2393 |
| Demold Time (22°C) | 2.0 | min | |
| Post Cure Time (100°C) | 6.0 | hr |
| Additional Information |
|---|
| Specific Gravity, ASTM D792, 77°F: 1.08 g/mlDurometer Hardness, ASTM D2240, Shore A: 90 to 92Die C Tear, ASTM D1004: 350 pliMixing Ratio: 1 to 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TyrFil® XL-Low Odor | Pathway Polymers | PUR-MDI | TyrFil® |
| Aquivion® P87S-SO2F | Solvay Specialty Polymers | PFSF | Aquivion® |
| Elastollan® Soft 45 AP | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
| MAXAMID™ PA66-MOS2-BK | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
| ULTEM™ 2300F resin | SABIC Innovative Plastics | PEI | ULTEM™ |
