Order Products : sales@su-jiao.com
EVALENE® LLDPE LF20186
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | JG Summit Petrochemical Corporation |
| Trademark: | EVALENE® LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yDHKDh_EVALENE-LLDPE-LF20186.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LLDPE is used for heavy-duty sacks, lamination films, industrial cosmetics, pharmaceutical and food packaging materials. Low Heat Seal Temperatures. Strong Seals. Excellent Tear, Puncture and Impact Strengths. These properties make Evalene® the best choice for LLDPE packaging films. Its outstanding environmental stress crack resistance, good impact properties at low temperatures, and warp resistance also make it attractive for injection molding applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Secant Modulus 2 | ASTM D882 | ||
| MD : 25 µm, Blown Film | 200 | MPa | |
| TD : 25 µm, Blown Film | 210 | MPa | |
| Tensile Strength 3 | ASTM D882 | ||
| MD : Break, 25 µm, Blown Film | 15.0 | MPa | |
| TD : Break, 25 µm, Blown Film | 12.0 | MPa | |
| Tensile Elongation 4 | ASTM D882 | ||
| MD : Break, 25 µm, Blown Film | 600 | % | |
| TD : Break, 25 µm, Blown Film | 550 | % | |
| Dart Drop Impact (25 µm, Blown Film) | 95 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm, Blown Film | 200 | g | |
| TD : 25 µm, Blown Film | 330 | g |
| Note Message | |
|---|---|
| 1 . | Density is that of the base polymer. Final density is higher due to the presence of antiblock |
| 2 . | 25 mm/min |
| 3 . | 500 mm/min |
| 4 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Velocity® LCF40-PA6 | PlastiComp, Inc. | Nylon 6 | Velocity® |
| Avantra® 8330 | PMC Group Polymer Products | PS (HIPS) | Avantra® |
| Delrin® Stock Shapes AF Blend | Ensinger Inc. | Acetal (POM) Homopolymer | Delrin® Stock Shapes |
| Kuraray Poval® PVA 102 | Kuraray Co., Ltd. | PVOH | Kuraray Poval® |
| Duron PPS 40GF | ProPolymers Inc. | PPS | Duron |
