Telcar® TL-2934F Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Telcar TL-2934F is a general purpose thermoplastic elastomer, available in Nat, BLK, and colors, designed for electrical applications requiring flexibility over a wide temperature range. Telcar TL-2934F is a medium hardness, high density grade that is UL 94 rated with 720hr sunlight resistance and is suitable for both injection molding and extrusion.

General Information
Features	High specific gravity High density Good formability Good coloring Low liquidity Halogenated Sunlight resistance, 720 hours Fill brominated Medium hardness Flame retardancy
Uses	Cable sheath Electrical/Electronic Applications Wire and cable applications Wire sheath Insulating material Connector Rubber substitution
Agency Ratings	UL 94
RoHS Compliance	RoHS compliance
Appearance	White Black Yellow Natural color
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.30	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR)	0.10	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	72		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ASTM D412
100% strain, 0.508mm	3.03	MPa	ASTM D412
300% strain, 0.508mm	4.48	MPa	ASTM D412
Tensile Strength (fracture, 0.508mm)	11.0	MPa	ASTM D412
Tensile Elongation (fracture, 0.508mm)	600	%	ASTM D412

Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air (158°C, 168 hr)	7.0	%	ASTM D573
Change in Ultimate Elongation in Air (158°C, 168 hr)	-11	%	ASTM D573
Change in Tensile Strength (60°C, 168 hr, in IRM 902 Oil)	-16	%	ASTM D471
Change in Ultimate Elongation (60°C, 168 hr, in IRM 902 Oil)	-13	%	ASTM D471

Thermal	Nominal Value	Unit	Test Method
Continuous Use Temperature	105	°C	ASTM D794
Brittleness Temperature	-47.0	°C	ASTM D746
RTI Elec	50.0	°C	UL 746
RTI	50.0	°C	UL 746

Electrical	Nominal Value	Unit	Test Method
Dielectric Constant (1 kHz)	2.60		ASTM D150

Flammability	Nominal Value	Unit	Test Method
Flame Rating			UL 94
1.5 mm, BK	V-1		UL 94
1.5 mm, NT, WT, YL	V-0		UL 94
Oxygen Index	29	%	ASTM D2863

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	199 - 216	°C
Middle Temperature	213 - 221	°C
Front Temperature	221 - 227	°C
Nozzle Temperature	221 - 229	°C
Processing (Melt) Temp	221 - 229	°C
Mold Temperature	25 - 66	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Moderate-Fast
Back Pressure	0.172 - 0.345	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	193 - 210	°C
Cylinder Zone 2 Temp.	199 - 216	°C
Cylinder Zone 3 Temp.	213 - 221	°C
Cylinder Zone 4 Temp.	213 - 221	°C
Cylinder Zone 5 Temp.	221 - 227	°C
Die Temperature	221 - 229	°C

Extrusion instructions
Screw Speed: 30 to 100 rpm

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Telcar®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	y8DrGt_TelcarTL2934F.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Sanren M3700C (1st-grade)	SINOPEC Shanghai Petrochemical Co. Ltd.	PP Homopolymer	Sanren
SureSpec LD20-002	Genesis Polymers	LDPE	SureSpec
Dryflex® 602400 A01	ELASTO	SEBS	Dryflex®
KOPLA PA66 KDG1030ST	KOPLA Co., Ltd.	Nylon 66	KOPLA PA66
LNP™ STAT-KON™ RX08408 compound	SABIC Innovative Plastics	Nylon 66	LNP™ STAT-KON™