Order Products : sales@su-jiao.com
Zytel® 77G33L NC010
| Category: | Nylon 612 , NYLON RESIN |
| Manufacturer: | DuPont Performance Polymers |
| Trademark: | Zytel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | y79DhQ_Zytel-77G33L-NC010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 33% Glass Reinforced Polyamide 612 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Multi-Point Data |
|
| Part Marking Code (ISO 11469) |
|
| Resin ID (ISO 1043) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.32 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ||||
| Flow : 3.20 mm | 0.20 | -- | % | Internal Method |
| Across Flow : 3.20 mm | 1.0 | -- | % | Internal Method |
| Across Flow | 0.90 | -- | % | ISO 294-4 |
| Flow | 0.30 | -- | % | ISO 294-4 |
| Water Absorption | ||||
| 24 hr | 0.30 | -- | % | ASTM D570 |
| 23°C, 24 hr, 2.00 mm | 1.8 | -- | % | ISO 62 |
| Equilibrium, 23°C, 2.00 mm, 50% RH | 0.70 | -- | % | ISO 62 |
| Viscosity Number | 100 | -- | cm³/g | ISO 307 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 9500 | 7900 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 168 | 140 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.2 | 3.2 | % | ISO 527-2 |
| Flexural Modulus | 8200 | 7000 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -40°C | 12 | 10 | kJ/m² | |
| -30°C | 11 | 10 | kJ/m² | |
| 23°C | 13 | 12 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 60 | 65 | kJ/m² | |
| 23°C | 80 | 90 | kJ/m² | |
| Notched Izod Impact Strength | ISO 180/1A | |||
| -40°C | 11 | 10 | kJ/m² | |
| -30°C | 11 | 10 | kJ/m² | |
| 23°C | 13 | 12 | kJ/m² | |
| Unnotched Izod Impact Strength | ISO 180/1U | |||
| -30°C | 60 | 45 | kJ/m² | |
| 23°C | 70 | 60 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 216 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 200 | -- | °C | ISO 75-2/A |
| Glass Transition Temperature 1 | 65.0 | -- | °C | ISO 11357-2 |
| Melting Temperature 2 | 218 | -- | °C | ISO 11357-3 |
| CLTE | ISO 11359-2 | |||
| Flow | 1.7E-5 | -- | cm/cm/°C | |
| Flow : -40 to 23°C | 2.6E-5 | -- | cm/cm/°C | |
| Flow : 55 to 160°C | 1.6E-5 | -- | cm/cm/°C | |
| Transverse | 1.1E-4 | -- | cm/cm/°C | |
| Transverse : -40 to 23°C | 8.3E-5 | -- | cm/cm/°C | |
| Transverse : 55 to 160°C | 1.6E-4 | -- | cm/cm/°C |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | -- | 1.0E+12 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+12 | ohms·cm | IEC 60093 |
| Electric Strength | 33 | 30 | kV/mm | IEC 60243-1 |
| Relative Permittivity | IEC 60250 | |||
| 100 Hz | 4.10 | -- | ||
| 1 MHz | 3.80 | -- | ||
| Dissipation Factor | IEC 60250 | |||
| 100 Hz | 0.014 | -- | ||
| 1 MHz | 0.015 | -- | ||
| Comparative Tracking Index | 600 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Burning Rate (1.00 mm) | 23 | -- | mm/min | ISO 3795 |
| Flammability Classification | IEC 60695-11-10, -20 | |||
| 0.710 mm | HB | -- | ||
| 1.50 mm | HB | -- | ||
| Oxygen Index | 23 | -- | % | ISO 4589-2 |
| Fill Analysis | Dry | Conditioned | Unit | |
|---|---|---|---|---|
| Specific Heat Capacity of Melt | 2130 | -- | J/kg/°C | |
| Thermal Conductivity of Melt | 0.26 | -- | W/m/K |
| Additional Information | Dry | Conditioned | Unit | |
|---|---|---|---|---|
| Effective Thermal Diffusivity | 0.0750 | -- | cSt |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| 2 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Bapolene® PP5061 | Bamberger Polymers, Inc. | PP Random Copolymer | Bapolene® |
| Geon™ Vinyl Flexible A80U0 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| EMERGE™ PC 4701-13 | Trinseo | PC | EMERGE™ |
| ALTECH® PP-H FC 1000/576 | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® PP-H |
| EPAMOULD 674D12 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
