Order Products : sales@su-jiao.com

Pebax® MH 1657

Category:	PEBA-Ether , Polyether Block Amide
Manufacturer:	Arkema
Trademark:	Pebax®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	y3TRIM_Pebax-MH-1657.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Polyether block amide Pebax® MH 1657 is a thermoplastic elastomer made of flexible polyether and rigid polyamide.

Pebax® MH 1657 is an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part.

This hydrophilic grade when extruded into either a thin film or laminated on to a substrate also offers excellent permeability to moisture vapor while remaining waterproof.

General Information
Additive	Antistatic
Features	Antistatic Hydrophilic
Uses	Film Laminates Membranes
Appearance	Clear/Transparent
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.14	g/cm³	ISO 1183
Water Absorption			ISO 62
23°C, 24 hr	120	%
Equilibrium, 23°C, 50% RH	4.5	%

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	40		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus	80.0	MPa	ISO 178

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	204	°C	ISO 11357-3

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+9	ohms	IEC 60093
Volume Resistivity	2.0E+9	ohms·cm	IEC 60093
Charge Decay Time	< 1.0	sec	MIL B-81705

Optical	Nominal Value		Test Method
Refractive Index	1.508		Internal Method

Injection	Nominal Value	Unit
Drying Temperature	70.0 to 90.0	°C
Drying Time	5.0 to 7.0	hr
Processing (Melt) Temp	230 to 260	°C
Mold Temperature	25.0 to 60.0	°C

Extrusion	Nominal Value	Unit
Drying Temperature	70.0 to 90.0	°C
Drying Time	5.0 to 7.0	hr
Melt Temperature	230 to 280	°C

Resin Grade	Manufacturer	Category	Trademark
Resiten® G9	ITEN INDUSTRIES	Phenolic	Resiten®
SLOVAMID® 6 GF 30 FRG 5	Plastcom	Nylon 6	SLOVAMID® 6
Spartech Polycom SC1F-4009	Spartech Polycom	ABS	Spartech
NuSil MED3-4213	NuSil Technology	Silicone	NuSil
Exelene® PP C1204	Montachem International, Inc.	PP Impact Copolymer	Exelene® PP