Order Products : sales@su-jiao.com
Formolene® 3335N
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | y1skW2_Formolene-3335N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® 3335N is a high melt flow random copolymer with fast cycle time, and easy mold release. It is designed for thin walled injection molding applications. Its stiffness makes it a good choice for applications requiring greater flex modulus than conventional random copolymers. Formolene® 3335N meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 106 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 30.3 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 12 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1030 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 43 | J/m | ASTM D256 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DINALON® PA 6.6 50% FV | Grupo Repol | Nylon 66 | DINALON® |
| Generic PC - Nano, Carbon | Generic | PC | Generic |
| LNP™ THERMOCOMP™ UF009AXP compound | SABIC Innovative Plastics Europe | PPA | LNP™ THERMOCOMP™ |
| WELLAMID Nylon 6600-PA66-GV 25 HWV0CP | CP-Polymer-Technik GmbH & Co. KG | Nylon 66 | WELLAMID Nylon |
| Geon™ Vinyl Rigid Molding M3601 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Molding |
