Order Products : sales@su-jiao.com
Generic Epoxy - Unspecified
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | y1Ce4h_Generic-Epoxy---Unspecified.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Epoxy - Unspecified This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.28 to 2.19 | g/cm³ | ASTM D792 |
| Apparent Density | 1.50 to 1.62 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow (23°C) | 0.13 to 1.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (23°C) | 64 to 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 11.3 to 58.4 | MPa | ASTM D638 |
| Flexural Strength (Yield, 23°C) | 46.9 to 90.3 | MPa | ASTM D790 |
| Compressive Strength (23°C) | 70.7 to 137 | MPa | ASTM D695 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 130 to 155 | °C | ASTM D794 |
| CLTE - Flow | 2.2E-5 to 9.0E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+15 to 6.0E+17 | ohms | ASTM D257 |
| Volume Resistivity (23°C) | 7.0E+12 to 5.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength (23°C) | 15 | kV/mm | ASTM D149 |
| Dielectric Constant (23°C) | 4.10 to 5.76 | ASTM D150 | |
| Dissipation Factor (23°C) | 4.0E-3 to 0.036 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Pot Life (23°C) | 30 to 490 | min | |
| Thermoset Mix Viscosity | 2000 to 12200 | cP | ASTM D2393 |
| Demold Time | 95 to 1400 | min |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Color | Amber Black Colorless | ||
| Density (23°C) | 0.938 to 2.09 | g/cm³ | |
| Viscosity (23°C) | 0.010 to 18 | Pa·s |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premier HD08061 | Premier Polymers, LLC. | HDPE | Premier |
| SUMIPEX® HT03Y | Sumitomo Chemical Co., Ltd. | Acrylic (PMMA) | SUMIPEX® |
| Daelim Po1y® 5070(UV) | DAELIM INDUSTRIAL CO., LTD. | HDPE | Daelim Po1y® |
| Magnobond 3347 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
| Eco-Solutions GP3002 | Minima Technology Co., Ltd. | PLA | Eco-Solutions |
