Order Products : sales@su-jiao.com
tivilon® F 65 Dx 4
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | API SpA |
| Trademark: | tivilon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xzRPHQ_tivilon-F-65-Dx-4.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
tivilon®F 65 Dx 4 is a thermoplastic vulcanized rubber (TPV) product,. It can be processed by injection molding and is available in Europe. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 30 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| -- | 6.00 | MPa | ASTM D638 |
| 100% strain | 2.00 | MPa | ASTM D638 |
| 300% strain | 2.80 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 650 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 25.0 | kN/m | ASTM D624 |
| Compression Set (70°C, 24 hr) | 45 | % | ASTM D395 |
| Additional Information |
|---|
| Dx = UV Resistance Level DE = standard UV resistance level DI = medium UV resistance level DR = high UV resistance level |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 75.0 - 80.0 | °C | |
| Drying Time | 1.5 - 2.0 | hr | |
| Rear Temperature | 170 - 180 | °C | |
| Middle Temperature | 180 - 190 | °C | |
| Front Temperature | 185 - 200 | °C | |
| Nozzle Temperature | 190 - 210 | °C | |
| Mold Temperature | 35.0 - 50.0 | °C |
| Injection instructions |
|---|
| Injection Pressure: MediumBack Pressure: Low to MediumLocking Pressure: Medium to Fast |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 75.0 - 80.0 | °C | |
| Drying Time | 1.5 - 2.0 | hr | |
| Cylinder Zone 1 Temp. | 160 - 170 | °C | |
| Cylinder Zone 2 Temp. | 170 - 180 | °C | |
| Cylinder Zone 3 Temp. | 175 - 185 | °C | |
| Cylinder Zone 4 Temp. | 180 - 190 | °C | |
| Die Temperature | 190 - 200 | °C |
| Extrusion instructions |
|---|
| L/D Ratio: >20:1Compression Ratio: 1:2.5 |
| Note Message | |
|---|---|
| 1 . | Without Notch |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 205 TFE 20 | RTP Company | Nylon 66 | RTP |
| TEREZ POM 8005 | TER HELL PLASTIC GMBH | Acetal (POM) Copolymer | TEREZ POM |
| NEXT REGRIND PA66 70G33-300RG | NEXT Specialty Resins, Inc. | Nylon 66 | NEXT REGRIND |
| Chemical Resources PC600 | Chemical Resources, Inc. | PC | Chemical Resources |
| Generic PBT - Glass Bead\Glass Fiber | Generic | PBT | Generic |
