Order Products : sales@su-jiao.com
NEO-ZEX™ 2074F
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Prime Polymer Co., Ltd. |
| Trademark: | NEO-ZEX™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xyyGk6_NEO-ZEX-2074F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| NEO-ZEX™2074F is a linear low density polyethylene product,. It can be processed by injection molding and is available in North America, Europe or the Asia-Pacific region. The main characteristics are: good rigidity. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 25 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Injection Molded) | 1.00 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 63 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, Injection Molded) | 16.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | 120 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 570 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength (Injection Molded) | 6.0 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 117 | °C | ISO 306 |
| Melting Temperature (DSC) | 125 | °C | ISO 3146 |
| Additional Information |
|---|
| The value listed as Melting Temperature, ISO 3146, was tested in accordance with ISO 11357-3 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sumitomo DAP FS-5 | Sumitomo Bakelite North America, Inc. | DAP | Sumitomo DAP |
| WACKER® PRIMER G 790 | Wacker Chemie AG | Silicone | WACKER® |
| UNITREX® Unfilled PEEK | Nytef Plastics, Ltd. | PEEK | UNITREX® |
| BJB Polyurethane F-25 A/B | BJB Enterprises, Inc. | TSU | BJB Polyurethane |
| POLIGOM G/30 CS | Crosspolimeri S.p.A. | EPDM | POLIGOM |
