Order Products : sales@su-jiao.com
Microthene® G MN71400
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Microthene® G |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xufGYR_Microthene-G-MN71400.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Microthene G polyolefin powders are ground, irregularly-shaped particles designed for use in a broad range of specialty applications. Microthene G powders combine the unique properties of a polyolefin resin with a small, ground, particle size. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.912 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 70 | g/10 min | ASTM D1238 |
| Average Particle Size | 50 | mesh | |
| Particle Shape | Irregular |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore D | 51 | ||
| Shore D, 15 sec | 44 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 7.70 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 400 | % | ASTM D638 |
| Flexural Modulus | 186 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -22.7 | °C | ASTM D746 |
| Vicat Softening Temperature | 75.6 | °C | ASTM D1525 |
| Melting Temperature | 101 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Virantage® VW-10300 P, FP & SFP | Solvay Specialty Polymers | PESU | Virantage® |
| Bio-Flex® F 2110 | FKuR Kunststoff GmbH | PLA | Bio-Flex® |
| ESTOPLAST XU 430 BB01 | Ester Industries Ltd. | Nylon, Unspecified | ESTOPLAST XU |
| Flontech® FT-STST50-1 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| KUBE PIR 40702 | KUBE Electronics AG | HDPE | KUBE PIR |
