Order Products : sales@su-jiao.com
ISOTHANE® 2095A-M1
| Category: | TPU-Capro , Thermoplastic Polyurethane Elastomer (Polycaprolactone) |
| Manufacturer: | Great Eastern Resins Industrial Co., Ltd. (GRECO) |
| Trademark: | ISOTHANE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xraZB5_ISOTHANE2095AM1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ISOTHANE 2095A-M1 product is polycaprolactone based thermoplastic polyurethanes. It exhibits high elasticity, hydrolysis resistant, oil resistance and low compression set. This product is particularly suitable for oil seals production. The product can be injection molded. Suggested Applications: Gaskets, Oil Rings, Seals, Packing, Boots, Pads, Hoops, Tubes, Shoes. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 94 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% strain | 12.0 | MPa | ASTM D412 |
| 100% strain | 15.0 | MPa | ASTM D412 |
| 300% strain | 35.0 | MPa | ASTM D412 |
| Tensile Strength | 56.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 390 | % | ASTM D412 |
| Tear Strength 1 | 164 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 70°C, 24 hr | 29 | % | ASTM D395B |
| 100°C, 24 hr | 41 | % | ASTM D395B |
| Bayshore Resilience | 34 | % | ASTM D2632 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 195 - 205 | °C | |
| Middle Temperature | 200 - 210 | °C | |
| Front Temperature | 200 - 210 | °C | |
| Nozzle Temperature | 190 - 200 | °C |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 6177-85 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Amodel® AT-1125 HS | Solvay Specialty Polymers | PPA | Amodel® |
| KMI PBS KM803 | KMI Group Inc. | PBS | KMI PBS |
| Kuraray Poval® PVA 225 | Kuraray Co., Ltd. | PVOH | Kuraray Poval® |
| PENTAMID B GV15 H natur | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
