Order Products : sales@su-jiao.com
SABIC® HDPE M300054
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | SABIC Americas, Inc. |
| Trademark: | SABIC® HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xoY7zV_SABIC-HDPE-M300054.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
M300054 is High Density Polyethylene grade with narrow molecular weight distribution suitable for injection molding applications. It has been designed to give good flow properties, low warpage with faster molding cycles and excellent gloss. Typical Applications M300054 is recommended for houseware, small containers, caps, cups & tubs and various thin wall articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 30 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693B | ||
| 10% Igepal, Compression Molded, F50 | < 1.00 | hr | |
| 100% Igepal, Compression Molded, F50 | < 1.00 | hr |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 1% Secant (Injection Molded) | 750 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield, Injection Molded | 23.0 | MPa | |
| Break, Injection Molded | 12.0 | MPa | |
| Tensile Elongation (Break, Injection Molded) | 200 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 800 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 22.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Injection Molded) | 28 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 121 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 175 to 230 | °C | |
| Middle Temperature | 175 to 230 | °C | |
| Front Temperature | 175 to 230 | °C | |
| Mold Temperature | 15.0 to 60.0 | °C | |
| Injection Pressure | 60.0 to 100 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP EMI 2261 | RTP Company | PEEK | RTP |
| Retpol® CA 03 UVH | PolyPacific Pty. Ltd. | PP Copolymer | Retpol® |
| Lotrène® LDPE MG70 | QAPCO | LDPE | Lotrène® LDPE |
| OP - PC - Unfilled 1518-FDA | Oxford Polymers | PC | OP - PC - Unfilled |
| Neoflex™ 8065 | Zylog Plastalloys Pvt. Ltd. | TPE | Neoflex™ |
