Order Products : sales@su-jiao.com
Generic SEBS - Unspecified
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xmyihP_Generic-SEBS---Unspecified.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic SEBS - Unspecified This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 0.940 - 1.18 | g/cm³ | ASTM D792 |
| 23°C | 1.02 - 1.05 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 28 - 36 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | |||
| 23°C | 18 - 93 | ASTM D2240 | |
| 23°C | 20 - 91 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain, 23°C | 0.300 - 1.43 | MPa | ASTM D412 |
| 300% strain, 23°C | 0.630 - 8.20 | MPa | ASTM D412 |
| Tensile Strength | ASTM D412 | ||
| Yield, 23°C | 5.47 - 11.1 | MPa | ASTM D412 |
| Fracture, 23°C | 5.00 - 17.5 | MPa | ASTM D412 |
| Tensile Elongation (Break, 23°C) | 650 - 950 | % | ASTM D412 |
| Tear Strength (23°C) | 16.0 - 36.0 | kN/m | ASTM D624 |
| Compression Set | 33 - 72 | % | ASTM D395 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 160 - 180 | °C | |
| Middle Temperature | 170 - 180 | °C | |
| Front Temperature | 180 - 181 | °C | |
| Nozzle Temperature | 175 - 191 | °C | |
| Processing (Melt) Temp | 160 - 250 | °C | |
| Mold Temperature | 30.0 - 45.0 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic SEBS - UnspecifiedThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadrant EPP TIVAR® SuperPlus | Quadrant Engineering Plastic Products | UHMWPE | Quadrant EPP |
| SILVER® VJIS75/3-K | Guangdong Silver Age Sci & Tech. Co., Ltd | PVC, Unspecified | SILVER® |
| VITAMIDE® BS10NT6336 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| Ultracast™ AP Red Label | Hapco Inc. | Epoxy | Ultracast™ |
| Hiprolon® 200 MNWHL G30 | Arkema | Nylon 1010 | Hiprolon® |
