Order Products : sales@su-jiao.com
Medalist® MD-100
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Medalist® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xmiYD5_Medalist-MD-100.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This compound is designed for medical and healthcare applications requiring an ultra-soft, gel like material. |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.870 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (125°C/2.16 kg) | 10 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 2.6 | % | ASTM D955 |
| Transverse flow | 4.1 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 5 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 0.207 | MPa | ASTM D412 |
| 200% strain | 0.276 | MPa | ASTM D412 |
| 300% strain | 0.345 | MPa | ASTM D412 |
| Tensile Strength (Break) | 2.07 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 700 | % | ASTM D412 |
| Tear Strength | 7.01 | kN/m | ASTM D624 |
| Compression Set | 34 | % | ASTM D395 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 138 - 149 | °C | |
| Middle Temperature | 149 - 160 | °C | |
| Front Temperature | 160 - 171 | °C | |
| Nozzle Temperature | 171 - 182 | °C | |
| Processing (Melt) Temp | 171 - 182 | °C | |
| Mold Temperature | 21.1 - 37.8 | °C | |
| Injection Pressure | 1.38 - 5.52 | MPa | |
| Back Pressure | 0.172 - 0.689 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Cushion | 3.81 - 25.4 | mm |
| Injection instructions |
|---|
| Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C). |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Thermoset Plastics 267 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| Nymax™ GF600 A13 H UV830K | PolyOne Corporation | Nylon 6 | Nymax™ |
| Arylmax® K7500CF30 | Polymics, Ltd. | PAEK | Arylmax® |
| Grilon® BK-50 | EMS-GRIVORY | Nylon 6 | Grilon® |
| Osterlene® PPC20-2NA | Osterman & Company | PP Impact Copolymer | Osterlene® |
