Order Products : sales@su-jiao.com
RTP 6001-70A Z
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xmA6dC_RTP-6001-70A-Z.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FDA Compliant Ingredients |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.0 - 5.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.20 mm) | 1.2 - 1.8 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain, 3.18 mm) | 1.86 | MPa | ASTM D412 |
| Tensile Strength 2(Yield, 3.20 mm) | 6.21 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 860 | % | ASTM D412 |
| Tear Strength 4 | 31.5 | kN/m | ASTM D624 |
| Compression Set 5 | ASTM D395B | ||
| 23°C, 22 hr | 25 | % | ASTM D395B |
| 70°C, 22 hr | 70 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 51.7 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 182 - 238 | °C | |
| Mold Temperature | 10.0 - 48.9 | °C |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | Mouth die C, 510mm/min |
| 2 . | C mold, 500 mm/min |
| 3 . | Mouth die C, 500 mm/min |
| 4 . | C mould |
| 5 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rely-imide 660 | Henkel Ablestik | TP, Unspecified | Rely-imide |
| Tecomid® NA40 GR15 GR003 XA70 | Eurotec Engineering Plastics | Nylon 66 | Tecomid® |
| Geon™ Vinyl Rigid Extrusion L0660 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| KOPA® KN333G15 | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
| Sylvin 4250-50 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
