Order Products : sales@su-jiao.com
VICOTE® F813Blk
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Victrex plc |
| Trademark: | VICOTE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xllGCo_VICOTE-F813Blk.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
VICOTE® is the brand name for the Victrex range of coatings. The VICOTE Coatings are available through Victrex plc or its preferred coater network. The VICOTE F813Blk grade has been specifically formulated to provide a coating that gives high wear and abrasion resistance combined with excellent release properties that are retained as the coating wears. These properties are retained at high temperatures where other release coatings would potentially fail. VICOTE dispersions coatings have a low level of extractables. Contact Victrex plc for further details. VICOTE F813Blk dispersions coatings are aqueous based however there are small amounts of solvents present. Refer to the appropriate MSDS sheet for details. The VICTREX® PEEK polymer contained in the VICOTE dispersions like other non-coating grades of VICTREX PEEK polymer are thermoplastic in nature and exhibit flow above the melt temperature. When processed using the correct guidelines the coatings will exhibit the excellent properties that VICTREX PEEK polymer is renowned for. VICOTE Coatings have excellent chemical resistance. Consult the Victrex Chemical Resistance Data Base for further details. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (25°C) | 1.10 | g/cm³ | ISO 2811 |
| pH | 10.0 | Internal Method | |
| Viscosity (25°C) | 12.0 | sec | ISO 2431 |
| Weight - Solids | 37 | % | Internal Method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cross Hatch Adhesion 1 | ISO 2409 | ||
| Aluminum | 0 | ||
| Mild Steel | 0 | ||
| Stainless Steel | 0 | ||
| Direct Impact 2 | ISO 6272 | ||
| Height | 100.00 | cm | |
| Indentation depth | 0.50 | cm | |
| Weight | 2000 | g | |
| Konig Hardness (40.0 to 50.0 µm) | 1.8 | min | ISO 1522 |
| Theory Volume Solids | 26 | % |
| Mechanical | Nominal Value | Test Method | |
|---|---|---|---|
| Coefficient of Friction 3 | 0.021 | ASTM G133 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature 4 | 372 | °C | DSC |
| Note Message | |
|---|---|
| 1 . | Rating 0 to 5 |
| 2 . | Part 1 |
| 3 . | Using 250N Load, µm @ 10 min |
| 4 . | Peak |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 700 GB 20 Z | RTP Company | HDPE | RTP |
| Guang Sung PVC NBR-PVC 70 | Guang Sung Plastics (GSPL) | PVC, Unspecified | Guang Sung PVC |
| Kepex® 3300VS | Korea Engineering Plastics Co., Ltd | PBT | Kepex® |
| LNP™ STAT-KON™ WX11322 compound | SABIC Innovative Plastics Asia Pacific | PBT | LNP™ STAT-KON™ |
| PLANAC BT-2200 | TOYOBO America, Inc. | PBT | PLANAC |
