Order Products : sales@su-jiao.com
Braskem PP EP 200K
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Braskem |
| Trademark: | Braskem PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xlKU2p_Braskem-PP-EP-200K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EP 200K is a low fluidity heterophasic copolymer with good impact properties, even at low temperatures. Applications: Injection Molding of thick parts, containers, closures, battery cases. SPC in general. Processing: Injection Molding SPC |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.895 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.5 | g/10 min | ASTM D1238, ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | |||
| R-Scale, Injection Molded | 68 | ASTM D785 | |
| R-Scale | 53 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| Yield, Injection Molded | 23.0 | MPa | ASTM D638 |
| Yield, Injection Molded | 21.0 | MPa | ISO 527-2 |
| Tensile Elongation | |||
| Yield, Injection Molded | 7.0 | % | ASTM D638 |
| Yield, Injection Molded | 11 | % | ISO 527-2 |
| Flexural Modulus | |||
| 1% Secant : Injection Molded | 1100 | MPa | ASTM D790 |
| Injection Molded | 900 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| -20°C, Injection Molded | 60 | J/m | ASTM D256 |
| 23°C, Injection Molded | No Break | ASTM D256 | |
| -20°C, Injection Molded | 5.9 | kJ/m² | ISO 180 |
| 23°C, Injection Molded | 46 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed, Injection Molded | 86.0 | °C | ASTM D648 |
| 0.45 MPa, Unannealed | 80.0 | °C | ISO 75-2/B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Thermoset Plastics 125 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| TRIBOCOMP® PEEK CF30 TS0 | EPIC Polymers | PEEK | TRIBOCOMP® |
| Evermore PUR SS-1060G | Evermore Chemical Industry Co., Ltd. | PUR, Unspecified | Evermore PUR |
| Huafon JF-P-5980 / JF-I-6820 | Huafon Group Co., Ltd. | PUR-Ester | Huafon |
| HOPELEX PC-1070 | Lotte Chemical Corporation | PC | HOPELEX |
