Order Products : sales@su-jiao.com

3M™ Dyneon™ Fluoroelastomer FE 5625N

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ Fluoroelastomer
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	xcVKFA_3MDyneonFluoroelastomerFE5625N.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
3M™ Dyneon™ Fluoroelastomer FE 5625N is a dipolymer made from hexafluoropropylene and vinylidene fluoride. FE 5625N has an incorporated bisphenol cure system. Special Features Composition: dipolymer of vinylidene fluoride and hexafluoropropylene Process targets: injection and transfer moulding, extrusion and calendering Proprietary incorporated cure technology Cure profile adjusted for use in automatic multi cavity moulding equipment Superior flow over regular 3M™ Dyneon™ Fluoroelastomer injection moulding grades Improved scorch resistance at high moulding temperatures Excellent mould release - can be used in automated injection moulding equipment Clean running Typical Applications 3M™ Dyneon™ Fluoroelastomer FE 5625N is suitable for the production of O-rings in an injection moulding process.

Message

3M™ Dyneon™ Fluoroelastomer FE 5625N is a dipolymer made from hexafluoropropylene and vinylidene fluoride. FE 5625N has an incorporated bisphenol cure system.

Special Features

Composition: dipolymer of vinylidene fluoride and hexafluoropropylene

Process targets: injection and transfer moulding, extrusion and calendering

Proprietary incorporated cure technology

Cure profile adjusted for use in automatic multi cavity moulding equipment

Superior flow over regular 3M™ Dyneon™ Fluoroelastomer injection moulding grades

Improved scorch resistance at high moulding temperatures

Excellent mould release - can be used in automated injection moulding equipment

Clean running

Typical Applications
3M™ Dyneon™ Fluoroelastomer FE 5625N is suitable for the production of O-rings in an injection moulding process.

General Information
Features	Good demoulding performance
Uses	O-rings
Appearance	Opacity White-like
Forms	Thick sheet
Processing Method	Extrusion Resin transfer molding Calendering Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.80	g/cm³	Internal method
Mooney Viscosity (ML 1+10, 121°C)	20	MU	Internal method
Fluorine Content	66	%	Internal method

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	78		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(100% Strain)	6.80	MPa	ASTM D412A
Tensile Strength ²	13.0	MPa	ASTM D412A
Tensile Elongation ³(Break)	180	%	ASTM D412A
Compression Set			ASTM D1414
200°C, 70 hr ⁴	16	%	ASTM D1414
200°C, 70 hr ⁵	15	%	ASTM D1414

Note Message
1 .	D mould
2 .	Die D
3 .	D mould
4 .	Post cured 16 hours @ 230°C
5 .	Post cured 24 hours @ 260°C

Resin Grade	Manufacturer	Category	Trademark
TEDUR® L 9105-1	ALBIS PLASTIC GmbH	PPS	TEDUR®
TEKNIFLEX® MED 3012-0200	Tekni-Films, a div of Tekni-Plex	Film, PP	TEKNIFLEX® MED
Braskem PP HP 427J	Braskem	PP Homopolymer	Braskem PP
Cheng Yu NG1500S	Cheng Yu Plastic Company Limited	Nylon 66	Cheng Yu
KYDEX® V	SEKISUI Polymer Innovations, LLC	PMMA+PVC	KYDEX®