Order Products : sales@su-jiao.com
Generic PEEK - Aramid Fiber
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xSMunD_Generic-PEEK---Aramid-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PEEK - Aramid Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.31 - 1.50 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.13 - 1.3 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 5170 - 5560 | MPa | ASTM D638 |
| Tensile Strength (23°C) | 82.7 - 88.3 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 4820 - 5720 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 138 - 155 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 37 - 44 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 270 - 640 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 - 150 | °C | |
| Drying Time | 3.0 - 7.0 | hr | |
| Processing (Melt) Temp | 374 - 390 | °C | |
| Mold Temperature | 163 - 191 | °C | |
| Injection Pressure | 92.7 - 104 | MPa |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PEEK - Aramid FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUMIKASUPER® LCP E5008L | Sumitomo Chemical Co., Ltd. | LCP | SUMIKASUPER® LCP |
| AMPAL® MPV 2000 | RASCHIG GmbH | Polyester, TS | AMPAL® |
| AMTOPP BA15 | Inteplast Group | PP, Unspecified | AMTOPP |
| KOPPS® S13G40BL | Kolon Plastics, Inc. | PPS | KOPPS® |
| LNP™ STAT-KON™ DD0009 compound | SABIC Innovative Plastics | PC | LNP™ STAT-KON™ |
