Order Products : sales@su-jiao.com
ChronoThane™ P 80A
| Category: | PUR-MDI , Polyurethane (MDI) |
| Manufacturer: | CardioTech International, Inc. |
| Trademark: | ChronoThane™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xSIKAQ_ChronoThane-P-80A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ChronoThane™P 80A is a polyurethane (MDI) (PUR-MDI) material,. This product is available in North America and is processed by extrusion. ChronoThane™The main features of P 80A are:
ChronoThane™The typical application areas of P 80A are: medical/health care |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 103 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 5.86 | MPa | ASTM D412 |
| 300% strain | 12.1 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 35.2 | MPa | ASTM D412 |
| Tensile Elongation (Yield) | 550 | % | ASTM D412 |
| Tear Strength 1 | 73.6 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 85.0 | °C | ASTM D1525 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 193 | °C | |
| Cylinder Zone 2 Temp. | 193 | °C | |
| Cylinder Zone 3 Temp. | 193 | °C | |
| Melt Temperature | 210 | °C | |
| Die Temperature | 204 | °C |
| Extrusion instructions |
|---|
| Clamp Temperature: 400 °FL/D Screw Ratio: 24:1Compression Ratio: 2.5Flight Distribution: 12-6-6Cooling Water Temperature: 70 to 110 °F |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AEI SX545:CM540U | AEI Compounds Limited | XLPE | AEI |
| Braskem PP H 202HC | Braskem | PP Homopolymer | Braskem PP |
| Estane® 2103-55D TPU | Lubrizol Advanced Materials, Inc. | TPU-Polyether | Estane® |
| Lupolen 4261 A Q 135 | LyondellBasell Industries | HDPE, HMW | Lupolen |
| Pro-fax PL395N | INDELPRO, S.A. de C.V. | PP Homopolymer | Pro-fax |
