Order Products : sales@su-jiao.com

TOTAL Polyethylene Lumicene® M 3410 EP (EU - Blow Molding)

Category:	mMDPE , Metallocene Medium Density Polyethylene
Manufacturer:	TOTAL Refining & Chemicals
Trademark:	TOTAL Polyethylene
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	xRUqZ8_TOTALPolyethyleneLumiceneM3410EPEUBlowMolding.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Lumicene® mPE M3410 EP is a metallocene-based medium density polyethylene (MDPE) combining the features of conventional blow molding polyethylene with differentiated optical properties such as gloss and contact clarity. In combination with HDPE BM593 (physical blend), Lumicene mPE M3410 EP combines all the current requirements for the manufacture of blow molded packaging in the cosmetics and household liquids markets. Lumicene® mPE M3410 EP is a pellet grade and contains antioxidants.

Message

Lumicene® mPE M3410 EP is a metallocene-based medium density polyethylene (MDPE) combining the features of conventional blow molding polyethylene with differentiated optical properties such as gloss and contact clarity.

In combination with HDPE BM593 (physical blend), Lumicene mPE M3410 EP combines all the current requirements for the manufacture of blow molded packaging in the cosmetics and household liquids markets.

Lumicene® mPE M3410 EP is a pellet grade and contains antioxidants.

General Information
Additive	Antioxidation
Features	Antioxidation Transparent appearance Medium density
Uses	Cosmetic Packaging Packaging Mixing
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS compliance
Forms	Particle
Processing Method	Blow molding

Physical	Nominal Value	Unit	Test Method
Density	0.934	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.90	g/10 min	ISO 1133
Environmental Stress-Cracking Resistance (100% Antarox, F50)	> 1000	hr	ASTM D1693B

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	80	kJ/m²	ISO 179

Additional Information	Nominal Value	Unit
Blow Molding Temperature	160 - 200	°C

Resin Grade	Manufacturer	Category	Trademark
NaturePlast PHI 008	NaturePlast	PHA	NaturePlast
Eltex® A5006PFN1281	INEOS Olefins & Polymers Europe	HDPE Copolymer	Eltex®
OTECH PVC OW834 SR - Riser Insulation	OTECH Corporation	PVC, Unspecified	OTECH PVC
TECACOMP® PEEK 450 ID blue 3865	Ensinger GmbH	PEEK	TECACOMP®
Sylvin 8925-85 Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin