Order Products : sales@su-jiao.com
Andur 9000 AP
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xRDdcU_Andur-9000-AP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 9000-AP is a polyether (PPG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 90 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 21°C | 54000 | cP | ASTM D2393 |
| 70°C | 900 | cP | ASTM D2393 |
| 100°C | 200 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 4.8 to 5.3%Specific Gravity, ASTM D792, 70°F: 1.05 g/mlSpecific Gravity, ASTM D792, 212°F: 1.04 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRIMALLOY® B1900 | Mitsubishi Chemical Performance Polymers, Inc. | TPE | PRIMALLOY® |
| Prime Cor-X PE | Primex Plastics Corporation | HDPE | Prime Cor-X |
| SABIC® LDPE 2404N0 | Saudi Basic Industries Corporation (SABIC) | LDPE | SABIC® LDPE |
| Badamid® A70 SM-Z3 | Bada AG | Nylon 66 | Badamid® |
| Iupilon® LSH2030 | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
