Order Products : sales@su-jiao.com
Isocor™ HZ73SI
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Shakespeare Monofilaments and Specialty Polymers |
| Trademark: | Isocor™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xPcf0a_Isocor-HZ73SI.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Isocor™ HZ73SI is a high viscosity PA-6. This resin is specifically suited for applications requiring excellent abrasion, tensile and elongation properties. This resin can be processed using conventional techniques. Typical applications for Isocor™ HZ73SI include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.10 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 1.5 | -- | % | ASTM D955 |
| Water Absorption (24 hr) | -- | 0.53 | % | ASTM D570 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 1870 | 1640 | MPa | ASTM D638 |
| Tensile Strength | 52.6 | 53.8 | MPa | ASTM D638 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | 140 | 140 | J/m | ASTM D256 |
| Dart Drop Impact | 36.2 | 36.2 | J | ASTM D3029 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Glass Transition Temperature | 120 | -- | °C | DSC |
| Melting Temperature | 213 | -- | °C | DSC |
| Additional Information |
|---|
| 干燥 Color, ASTM D1003-97: 9.68 LColor, ASTM D1003-97: -4.64 aColor, ASTM D1003-97: -6.68 b |
| Injection | Dry | Unit | |
|---|---|---|---|
| Dew Point | < -17.8 | °C | |
| Suggested Max Moisture | 0.20 | % | |
| Hopper Temperature | 79.4 | °C | |
| Rear Temperature | 221 - 243 | °C | |
| Middle Temperature | 227 - 260 | °C | |
| Front Temperature | 238 - 271 | °C | |
| Nozzle Temperature | 238 - 271 | °C | |
| Processing (Melt) Temp | 238 - 271 | °C | |
| Mold Temperature | 10.0 - 93.3 | °C | |
| Injection Pressure | 3.45 - 13.8 | MPa | |
| Injection Rate | Fast | ||
| Back Pressure | 0.689 | MPa |
| Extrusion | Dry | Unit | |
|---|---|---|---|
| Suggested Max Moisture | 0.10 | % | |
| Hopper Temperature | 79.4 | °C | |
| Cylinder Zone 1 Temp. | 254 | °C | |
| Cylinder Zone 2 Temp. | 266 | °C | |
| Cylinder Zone 3 Temp. | 271 | °C | |
| Cylinder Zone 4 Temp. | 271 | °C | |
| Die Temperature | 260 | °C |
| Extrusion instructions |
|---|
| Flange: 510°F (266°C)Air Dew Point (max): 0°F (-18°C)Neck: 510°F (266°C)Head: 500°F (260°C)Pump: 500°F (260°C)L/D Ratio: 24 to 30:1Compression Ratio: 3.5:1Polymer @ Die: 450°F (232°C)Screw Pressure: 2000 psi |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ADDINYL A2 M20 V10 | ADDIPLAST | Nylon 66 | ADDINYL |
| Fainplast PVC PK 7075 | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| AKROLEN® PP GFM 25/15 black 950088 (1415) | AKRO-PLASTIC GmbH | PP, Unspecified | AKROLEN® |
| LUVOCOM® 1301-VAP 10 | LEHVOSS Group | PPS | LUVOCOM® |
| Sylvin 5417-85 Natural | Sylvin Technologies Incorporated | TPE | Sylvin |
