Order Products : sales@su-jiao.com
Adell Polyamide BJ-13 Glass Reinforced High Impact
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Adell Plastics, Inc. |
| Trademark: | Adell Polyamide |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xMX6NE_Adell-Polyamide-BJ-13-Glass-Reinforced-High-Impact.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Adell Polyamide BJ-13 Glass Reinforced High Impact is a Polyamide 6 (Nylon 6) material filled with glass fiber. It is available in North America. Primary attribute of Adell Polyamide BJ-13 Glass Reinforced High Impact: Impact Resistant. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 to 1.18 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.60 to 0.90 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.90 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | ASTM D785 | ||
| M-Scale | 76 | ||
| R-Scale | 112 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 86.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.0 to 4.0 | % | ASTM D638 |
| Flexural Modulus | 3450 | MPa | ASTM D790 |
| Flexural Strength | 108 | MPa | ASTM D790 |
| Compressive Strength | 103 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 150 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 199 | °C | |
| 1.8 MPa, Unannealed | 188 | °C | |
| Melting Temperature | 210 to 221 | °C | ASTM D789 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Bergadur™ BR3300-8023 RS BK011 | PolyOne Corporation | PBT | Bergadur™ |
| DURANEX® 3400 | Polyplastics Co., Ltd. | PBT | DURANEX® |
| Kotex KGN-10MRA | Kotec Corporation | PC | Kotex |
| Ingeo™ 4032D | NatureWorks® LLC | PLA | Ingeo™ |
| LNP™ LUBRICOMP™ CX94108 compound | SABIC Innovative Plastics Europe | PS (HIPS) | LNP™ LUBRICOMP™ |
