Order Products : sales@su-jiao.com
KYDEX® XD MB
| Category: | PMMA+PVC , Acrylic (PMMA) + PVC |
| Manufacturer: | SEKISUI Polymer Innovations, LLC |
| Trademark: | KYDEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xLfiMa_KYDEX-XD-MB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| KYDEX® XD MB is a thermoplastic 3D laminate giving designers the ability to incorporate compound corners, logos, and wire managment holes while eliminating unsightly seams and the need for edgebanding typically associated with HPL/TFM surfaces. Its integral colour and superior impact resistance minimizes costly maintenance associated with other laminates. Microban® protection is built-in to continously fight the growth of microbes. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.35 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, 3.18 mm) | 94 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (3.18 mm) | 2420 | MPa | ASTM D638 |
| Tensile Strength (3.18 mm) | 42.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 3.18 mm) | 130 | % | ASTM D638 |
| Flexural Modulus (3.18 mm) | 2480 | MPa | ASTM D790 |
| Flexural Strength (3.18 mm) | 66.0 | MPa | ASTM D790 |
| Taber Abrasion Resistance (1000 Cycles, 500 g, CS-10F Wheel) | 0.00950 | mg | ASTM D1044 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (1.02 mm) | 800 | J/m | ASTM D256 |
| Drop Impact Resistance (1.02 mm) | > 1000 | Internal Method |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Ball Impact Resistance (1.02 mm) | > 3000 | Internal Method | |
| Cleanability | 16.0 | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 1.8 MPa, Unannealed | 66.2 | °C | |
| 1.8 MPa, Annealed, 3.18 mm | 75.6 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 204F | RTP Company | Nylon 12 | RTP |
| Beetafin® RV9010 | BIP (Oldbury) Limited | PUR-Ester | Beetafin® |
| Estane® CP80AS2 TPU | Lubrizol Advanced Materials, Inc. | TPU-Polyester | Estane® |
| Elastane™ 4720-65D | Technical Polymers, LLC | TPU-Polyester | Elastane™ |
| INEOS PP H03W-00 | INEOS Olefins & Polymers USA | PP Homopolymer | INEOS PP |
