Order Products : sales@su-jiao.com
Sumitomo Epoxy E 8398
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Sumitomo Bakelite North America, Inc. |
| Trademark: | Sumitomo Epoxy |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xKlBDK_Sumitomo-Epoxy-E-8398.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| E 8398 is a fiberglass and mineral reinforced epoxy molding compound, with excellent dimensional stability, good electrical insulation properties, and good strength. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.83 | g/cm³ | ASTM D792 |
| Apparent Density | 0.90 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow | 0.50 | % | ASTM D955 |
| Water Absorption - 48 hr (50°C) | 0.10 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 76.0 | MPa | ASTM D638 |
| Flexural Modulus | 17000 | MPa | ASTM D790 |
| Flexural Strength (Break) | 140 | MPa | ASTM D790 |
| Compressive Strength | 280 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 19 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 1.8 MPa, Unannealed | 220 | °C | |
| 1.8 MPa, Annealed | > 282 | °C | |
| CLTE - Flow | 2.4E-5 | cm/cm/°C | ASTM E831 |
| Thermal Conductivity | 0.84 | W/m/K | ASTM C518 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | ASTM D149 | ||
| -- | 22 | kV/mm | |
| -- | 21 | kV/mm | |
| -- | 16 | kV/mm | |
| -- | 15 | kV/mm | |
| Dielectric Constant 1(1 MHz) | 3.90 | ASTM D150 | |
| Dissipation Factor 2(1 MHz) | 0.014 | ASTM D150 | |
| Arc Resistance | 180 | sec | ASTM D495 |
| Note Message | |
|---|---|
| 1 . | Wet |
| 2 . | Wet |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEFTEKHIM PE 4851B (504H3) | Nizhnekamskneftekhim Inc. | HDPE | NEFTEKHIM PE |
| Accura® Xtreme™ White 200 | 3D Systems | Unspecified | Accura® |
| ALTECH® NXT PP-H A 2035/457 HH GF35 CP | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® NXT PP-H |
| Formolene® 6613N | Formosa Plastics Corporation, U.S.A. | PP Copolymer | Formolene® |
| OTECH PVC OW635 - Connector | OTECH Corporation | PVC, Unspecified | OTECH PVC |
