Order Products : sales@su-jiao.com
Deltron 4340
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | Shanghai Lin Gen Rubber Materials Co., Ltd. |
| Trademark: | Deltron |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xHiQWG_Deltron4340.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Deltron 4340 is a polyphenylene sulfide (PPS) material,. This product is available in the Asia-Pacific region and is processed by injection molding. The main features of the Deltron 4340 are:
|
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.60 | g/cm³ | |
| Molding Shrinkage - Flow | 0.30 - 0.80 | % | |
| Water Absorption (Equilibrium) | 0.020 | % |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 98 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 128 | MPa | |
| Tensile Elongation (Break) | 5.5 | % | |
| Flexural Modulus | 11000 | MPa | |
| Flexural Strength | 186 | MPa | |
| Compressive Strength | 148 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Notched Izod Impact | 24.0 | kJ/m² |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 260 | °C | |
| Melting Temperature | 280 | °C | |
| CLTE - Flow | 1.9E-5 | cm/cm/°C |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Surface Resistivity | 2.0E+14 | ohms | |
| Volume Resistivity | 4.0E+16 | ohms·cm | |
| Dielectric Strength | 15 | kV/mm | |
| Dielectric Constant (1 MHz) | 3.00 |
| Flammability | Nominal Value | Unit | |
|---|---|---|---|
| Flame Rating (2.0 mm) | V-1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 - 140 | °C | |
| Drying Time | 4.0 - 8.0 | hr | |
| Rear Temperature | 240 - 260 | °C | |
| Middle Temperature | 290 - 310 | °C | |
| Front Temperature | 300 - 330 | °C | |
| Mold Temperature | 100 - 140 | °C | |
| Injection Rate | Moderate | ||
| Back Pressure | 60.0 - 80.0 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROBLEND 65 X0 | Taro Plast S.p.A. | PC+ABS | TAROBLEND |
| Tarnoform® 300 EC1 | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| Uniflon UNILUB 15 | UNIFLON | PTFE | Uniflon |
| ECOGRAN® PP 30%FV BLK | Eurocompound Polymers | PP, Unspecified | ECOGRAN® |
| PERCOM® KHT30 | A. Schulman Europe | PP Homopolymer | PERCOM® |
