Order Products : sales@su-jiao.com
Andur 80-5 AP
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xBS3pE_Andur-80-5-AP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 80-5AP is a polyether (PTMG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 83-85 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by curing Andur 80-5AP with polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 2600 | cP | ASTM D2393 |
| 100°C | 800 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 3 to 3.4%Viscosity, 70°F: Wax cpsSpecific Gravity, ASTM D792, 70°F: 1.05 g/mlSpecific Gravity, ASTM D792, 212°F: 1.035 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimaFlex® CP 2003-BK | Plastic Solutions, Inc. | PP Impact Copolymer | PrimaFlex® |
| MonoSol® M1030 38µ | MonoSol, LLC | PVOH | MonoSol® |
| DuraForm® GF | 3D Systems | Nylon, Unspecified | DuraForm® |
| Hylon® N2023STHL | Ravago Manufacturing Americas, LLC | Nylon 6 | Hylon® |
| Petrothene® GA501152 | LyondellBasell Industries | LLDPE | Petrothene® |
