Order Products : sales@su-jiao.com
Gallonprene® GP310-7502
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Shenzhen Sungallon Rubber & Plastic Corporation Limited |
| Trademark: | Gallonprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | x83wt4_Gallonprene-GP310-7502.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Gallonprene®GP310-7502 is a thermoplastic elastomer (TPE) product,. It is available in Africa and the Middle East, Latin America or Asia Pacific. Gallonprene®GP310-7502 application areas include electrical/electronic applications, electrical appliances, engineering/industrial accessories and industrial applications. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.09 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 7.6 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 23°C) | 75 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 5.50 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 500 | % | ASTM D412 |
| Injection instructions |
|---|
| Overmolding Parameters:Rear Temperature: 170 to 190°CCenter Temperature: 180 to 200°CFront Temperature: 190 to 210°CMelt Temperature: 160 to 180°CMold Temperature: 30 to 60°CProcessing Temperature Limit: 230°CInjection Pressure: HighInjection Speed: HighBack Pressure: 20 to 50%Drying Temperature: 80°CDrying Time: 4 hr |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SILVER® SA-2310 | Guangdong Silver Age Sci & Tech. Co., Ltd | SEBS | SILVER® |
| Generic PPE | Generic | PPE | Generic |
| KOPA® KN333HSBL | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
| Plasmer 1055NM/1002 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |
| StarFlex® 7026-1000 | Star Thermoplastic Alloys & Rubbers, Inc. | TPE | StarFlex® |
