Order Products : sales@su-jiao.com
Bormed™ HJ875MO
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Borealis AG |
| Trademark: | Bormed™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | x4r1Az_Bormed-HJ875MO.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Bormed HJ875MO is a resin intended for evaluation for use in Healthcare applications. Bormed HJ875MO is a high flow polypropylene Homopolymer. High flow enables lower cycle time, high injection rate and design of thin wall packaging. This grade is formulated for optimised extractables. Material can be sterilised with vapour (121 °C for 20 minutes) or EtO. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.905 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 75 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (1.00 mm) | 1600 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 35.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield) | 9.0 | % | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 1.8 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 87.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 153 | °C | ISO 306/A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 220 to 260 | °C | |
| Mold Temperature | 15.0 to 60.0 | °C | |
| Injection Rate | Fast | ||
| Holding Pressure | 20.0 to 50.0 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2101 LF | RTP Company | PEI | RTP |
| CERTENE™ 705 SAN | Muehlstein | SAN | CERTENE™ |
| LEXAN™ HP4 resin | SABIC Innovative Plastics | PC | LEXAN™ |
| Enable™ 27-05HH | ExxonMobil Chemical | mPE | Enable™ |
| ULTEM™ 2410 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
