Order Products : sales@su-jiao.com
Braskem PP RP 270G
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | Braskem |
| Trademark: | Braskem PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wwkulp_Braskem-PP-RP-270G.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
RP 270G is a low melt flow Random Copolymer for containers, bottles and packaging for parental solutions with good transparency. Applications: Extrusion Blow Molding (EBM) of containers, bottles, houseware. Packaging for parenteral solutions. Processing: Extrusion Blow Molding |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.902 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 77 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 27.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 13 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Injection Molded) | 900 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 100 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 84.0 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong Aobang TPU-Polyester 80-A | Shandong Aobang Chemical Technology Co.,Ltd. | TPU-Polyester | Shandong Aobang TPU-Polyester |
| Tecomid® NAX0 GR70 NL HS | Eurotec Engineering Plastics | Nylon 66 | Tecomid® |
| BMC HT12-1026 | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
| Flexirene® FF 25 | Versalis S.p.A. | LLDPE | Flexirene® |
| Fortron® MT9140L4 | Celanese Corporation | PPS | Fortron® |
