Order Products : sales@su-jiao.com
EMERGE™ PC 4902
| Category: | PC , Advanced Resin |
| Manufacturer: | Trinseo |
| Trademark: | EMERGE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ws7MZa_EMERGE-PC-4902.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EMERGE™ PC 4902 is a 20% glass fiber reinforced high flow ignition resistant polycarbonate resin. This grade provides flame rating UL 94 V0 at 1.6mm without the use of halogenated additives. It has superior processability and is ideal for structural frame components which are moving towards thinner wall sections. Main Characteristics:
Applications:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 25 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.15 to 0.25 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 3.20 mm, Injection Molded) | 89.0 | MPa | ASTM D638 |
| Flexural Modulus (3.20 mm, Injection Molded) | 6100 | MPa | ASTM D790 |
| Flexural Strength (3.20 mm, Injection Molded) | 150 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 80 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 105 | °C | ASTM D648 |
| CLTE - Flow | 6.6E-5 | cm/cm/°C | ASTM D696 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating 1(1.60 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Rear Temperature | 260 to 280 | °C | |
| Middle Temperature | 270 to 290 | °C | |
| Front Temperature | 270 to 290 | °C | |
| Nozzle Temperature | 280 to 300 | °C | |
| Mold Temperature | 60.0 to 100 | °C |
| Note Message | |
|---|---|
| 1 . | This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| EVAL™ FP101B | EVAL Europe nv | EVOH | EVAL™ |
| Kynar® 740 Red | Arkema | PVDF | Kynar® |
| LNP™ THERMOCOMP™ UF007SXC compound | SABIC Innovative Plastics Europe | PPA | LNP™ THERMOCOMP™ |
| LNP™ THERMOCOMP™ RF003ES compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
| MAJORIS CG308X - 8229 | AD majoris | PP, Unspecified | MAJORIS |
