Order Products : sales@su-jiao.com
Hylex® P1025L ML
| Category: | PC , Polycarbonate |
| Manufacturer: | Entec Polymers |
| Trademark: | Hylex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ws0LLD_HylexP1025LML.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCARBONATE, HIGH MELT FLOW |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 25 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 - 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, 23°C) | 65.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | > 70 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2310 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 93.1 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 640 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 126 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKAMID™ TB110SG30 | Mando Advanced Materials Co., Ltd. | Nylon 6 | TEKAMID™ |
| DuPure® G 72 | Ducor Petrochemicals BV | PP Homopolymer | DuPure® |
| FERREX® GPP35CN | Ferro Corporation | PP, Unspecified | FERREX® |
| Elastron® G G401.A30.T | Elastron USA, Inc. | SEBS | Elastron® G |
| PLUSTEK PA340S6 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
