Order Products : sales@su-jiao.com
Premier LB01018 - A
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Premier Polymers, LLC. |
| Trademark: | Premier |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wqlyU8_Premier-LB01018---A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Premier LB01018 is a butene linear low density polyethylene, designed for thin film applications requiring toughness and strength. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intented for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus | ASTM D882 | ||
| MD | 186 | MPa | |
| TD | 207 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Break | 27.6 | MPa | |
| TD : Break | 20.7 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 650 | % | |
| TD : Break | 850 | % | |
| Dart Drop Impact | 130 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 100 | g | |
| TD | 400 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze | 17 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 66 MI | Plastcom | Nylon 66 | SLOVAMID® 66 |
| TABOREX TA 1118 HD | SILON s.ro | HDPE | TABOREX |
| APEX® 3800-60NT1 | Teknor Apex Company | PVC, Flexible | APEX® |
| Kingfa PA6-MG30 | Kingfa | Nylon 6 | Kingfa |
| HiFill® PPSU GF10 | Techmer Engineered Solutions | PPSU | HiFill® |
