Order Products : sales@su-jiao.com
ARMAMID® PA MN 20-1AP
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Poly Plastic |
| Trademark: | ARMAMID® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wpz1GG_ARMAMID-PA-MN-20-1AP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ARMAMID® PA MN 20-1AP is a Polyamide 6 (Nylon 6) product. It is available in Europe. |
| General Information |
|---|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.43 | g/cm³ | |
| Molding Shrinkage | 0.60 to 0.70 | % | |
| Water Absorption | |||
| 23°C, 24 hr | 1.1 | % | |
| Saturation, 23°C | 7.2 | % | |
| Equilibrium, 23°C, 50% RH | 2.5 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress (Yield) | 70.0 | MPa | |
| Flexural Modulus (23°C) | 4800 | MPa | |
| Flexural Stress | 110 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Charpy Unnotched Impact Strength | |||
| -40°C | 18 | kJ/m² | |
| 20°C | 30 | kJ/m² |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 72.0 | °C | |
| Melting Temperature | 218 | °C |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Surface Resistivity | |||
| -- 1 | 1.0E+13 | ohms | |
| -- 2 | 1.0E+15 | ohms | |
| Volume Resistivity | |||
| -- 3 | 1.0E+15 | ohms·cm | |
| -- 4 | 1.0E+17 | ohms·cm | |
| Electric Strength | |||
| -- 5 | 25 to 30 | kV/mm | |
| -- 6 | 22 to 24 | kV/mm |
| Flammability | Nominal Value | Unit | |
|---|---|---|---|
| Glow Wire Ignition Temperature | 960 | °C |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Burn Resistant Category (2.00 mm) | PX-0 | ||
| Trekingostoykost (KIT) | 635.00 | cm |
| Note Message | |
|---|---|
| 1 . | Wet |
| 2 . | Dry |
| 3 . | Wet |
| 4 . | Dry |
| 5 . | Dry |
| 6 . | Wet |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shin-Etsu Elastomer C-19A | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| Moplen HP461Y | PolyMirae | PP, Unspecified | Moplen |
| Axpoly® PP34 1035 | Axion Polymers | PP, Unspecified | Axpoly® |
| POLYasa 1614F | Polykemi AB | ASA | POLYasa |
| Hyflon® PFA P140X | Solvay Specialty Polymers | PFA | Hyflon® PFA |
