Order Products : sales@su-jiao.com
RELENE® X24065
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wpRnao_RELENEX24065.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Relene X24065, is a Butene comonomer based Linear Low Density Polyethylene. This grade is designed for XLPE cable compounds. It offers superior Processability, ESCR and Abrasion resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.4 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (shaw d, 3.20mm, injection molding) | 53 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 3.20mm, injection molding | 11.0 | MPa | ASTM D638 |
| Fracture, 3.20mm, injection molding | 15.0 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield, 3.20mm, injection molding | 17 | % | ASTM D638 |
| Fracture, 3.20mm, injection molding | > 600 | % | ASTM D638 |
| Flexural Modulus (3.20 mm, Injection Molded) | 260 | MPa | ASTM D790 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trexprene® A45BU | Mitsubishi Chemical Performance Polymers, Inc. | TPV | Trexprene® |
| ENFLEX VU-420-75A | Ravago Group | PP+EPDM | ENFLEX |
| Iupilon® CFH2010 | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| Polycomp® PDR CB 08 | PolyPacific Pty. Ltd. | PP Copolymer | Polycomp® |
| Ultramid® HFX 32 BK00464 | BASF Corporation | Nylon 6 | Ultramid® |
