Order Products : sales@su-jiao.com

Pro-fax PL390N

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	INDELPRO, S.A. de C.V.
Trademark:	Pro-fax
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	whfUx2_ProfaxPL390N.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Profax PL390N is a high cristallinity homopolymer specially designed for extrusion and thermoforming. PL390N presents very high echanical properties providing good mechanical stability to the final application. Profax PL390N is available in pellet form. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: Very high cristallinity Gives mechanical stability Excellent mechanical properties Good transparency High heat deflection temperature Typical Applications: Extrusion Thermoforming

Message

Profax PL390N is a high cristallinity homopolymer specially designed for extrusion and thermoforming. PL390N presents very high echanical properties providing good mechanical stability to the final application. Profax PL390N is available in pellet form.

The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520.

Features:

Very high cristallinity

Gives mechanical stability

Excellent mechanical properties

Good transparency

High heat deflection temperature

Typical Applications:

Extrusion

Thermoforming

General Information
Additive	Clarifier
Features	High crystallization Homopolymer Definition, high
Uses	Thermoforming Applications
Agency Ratings	FDA 21 CFR 177.1520
Forms	Particle
Processing Method	Extrusion Thermoforming

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.900	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	3.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	39.0	MPa	ASTM D638
Tensile Elongation (Yield)	5.2	%	ASTM D638
Flexural Modulus	1950	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	28	J/m	ASTM D256A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	131	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
VESTAKEEP® 2000G	Evonik Industries AG	PEEK	VESTAKEEP®
TPUCO® TPUI-L75	Taiwan PU Corporation	TPU-Polyether	TPUCO®
ExxonMobil™ LDPE LD 165BW1	ExxonMobil Chemical	LDPE	ExxonMobil™ LDPE
Lion Idemitsu Composites PPS G531F2	Lion Idemitsu Composites Co., Ltd.	PPS	Lion Idemitsu Composites PPS
Loyblend® YA-1803	Colour Image Plastic Compound Sdn. Bhd. (CIPC)	ABS+PBT	Loyblend®