Order Products : sales@su-jiao.com
AURUM® PL6200
| Category: | PI, TP , Thermoplastic Polyimide |
| Manufacturer: | Mitsui Chemicals, Inc. |
| Trademark: | AURUM® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wfXYoY_AURUM-PL6200.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| AURUM® PL6200 is a Thermoplastic Polyimide material. It is available in Europe or North America. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.35 | g/cm³ | ASTM D792 |
| Molding Shrinkage | Internal Method | ||
| Flow | 1.1 | % | |
| Across Flow | 1.8 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 80.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.0 | % | ASTM D638 |
| Flexural Modulus | 4200 | MPa | ASTM D790 |
| Flexural Strength | 150 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 39 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 295 | °C | |
| 1.8 MPa, Unannealed | 239 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinpolene MFP14ZA3 | Teknor Apex Asia Pacific PTE. LTD. | PP, Unspecified | Sinpolene |
| Texalan® 6 Series 682A | Austin Novel Materials Co. Ltd. | TPU-Ester/Ether | Texalan® 6 Series |
| Ultramid® B33 L 01 | BASF Corporation | Nylon 6 | Ultramid® |
| New-prene™ 9350N | Total Polymer Vision (Suzhou) Co., LTD | PP+EPDM | New-prene™ |
| BMC 5209 | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
