Order Products : sales@su-jiao.com
Spartech Polycom SC7-70922
| Category: | PC , Polycarbonate |
| Manufacturer: | Spartech Polycom |
| Trademark: | Spartech |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wfR6Sr_Spartech-Polycom-SC7-70922.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Available in water clear or blue tint and with or without mold release. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 22 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 - 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2340 | MPa | ASTM D638 |
| Tensile Strength (Break) | 65.5 | MPa | ASTM D638 |
| Flexural Modulus | 2310 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 93.1 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 640 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 127 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Drying Time | 3.0 - 5.0 | hr | |
| Rear Temperature | 249 - 271 | °C | |
| Middle Temperature | 260 - 271 | °C | |
| Front Temperature | 271 - 288 | °C | |
| Nozzle Temperature | 266 - 282 | °C | |
| Processing (Melt) Temp | 277 - 293 | °C | |
| Mold Temperature | 71.1 - 93.3 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SNOLEN® EP 0.46/46 | JSC Gazprom neftekhim Salavat | HDPE | SNOLEN® |
| Argothane® 29102 | Argotec LLC | TPU, Unspecified | Argothane® |
| GAPEX® RPP10EB65GY | Ferro Corporation | PP Homopolymer | GAPEX® |
| Hypro® PPC-GF10 NATURAL | Entec Polymers | PP Impact Copolymer | Hypro® |
| ALCOM® PC 740/4 GY1227-08LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
