Order Products : sales@su-jiao.com
Vamac® DP
| Category: | AEM , Ethylene Acrylic Elastomer |
| Manufacturer: | DuPont Performance Elastomers |
| Trademark: | Vamac® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wf49Rz_Vamac-DP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
DuPont™ Vamac® DP is an ethylene acrylic dipolymer elastomer. Its general performance characteristics are similar to those of the Vamac® terpolymers, including:
|
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Mooney Viscosity | ASTM D1646 | ||
| 135°C | > 12 | MU | |
| ML 1+4, 100°C | 22 | MU | |
| Mooney Viscosity - ML (1+4) (100°C) | 43.6 | µm |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| MDR 1 | ASTM D5289 | ||
| MH : 177°C | 2.61 | J | |
| ML : 177°C | 0.103 | J | |
| Slope : 177°C | 6.00 | in-lbs/m.m | |
| T50 : 177°C | 1.1 | min | |
| T90 : 177°C | 3.6 | min | |
| Ts2 : 177°C | 0.5 | min | |
| Mooney Scorch | ASTM D1646 | ||
| t10 : 135°C | 11.3 | min | |
| t3 : 135°C | 8.2 | min | |
| TR Test - 10 | -24 | °C | ASTM D1329 |
| Volatiles | < 0.4 | wt% | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness 2(Shore A) | 64 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 3(100% Strain) | 7.20 | MPa | ASTM D412 |
| Tensile Strength 4(Yield) | 18.2 | MPa | ASTM D412 |
| Tensile Elongation 5(Break) | 210 | % | ASTM D412 |
| Compression Set | ASTM D395 | ||
| 150°C, 72 hr | 22 | % | |
| 150°C, 168 hr | 23 | % | |
| 150°C, 1008 hr | 43 | % |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air | ASTM D573 | ||
| 150°C, 168 hr | 1.0 | % | |
| 100% Strain, 150°C, 168 hr | 8.0 | % | |
| 150°C, 1008 hr | -5.0 | % | |
| 100% Strain, 150°C, 1008 hr | 20 | % | |
| Change in Ultimate Elongation in Air | ASTM D573 | ||
| 150°C, 168 hr | -1.0 | % | |
| 150°C, 1008 hr | -4.0 | % | |
| Change in Durometer Hardness in Air | ASTM D573 | ||
| Shore A, 150°C, 168 hr | 7.0 | ||
| Shore A, 150°C, 1008 hr | 9.0 | ||
| Change in Tensile Strength | ASTM D471 | ||
| 150°C, 168 hr, in ASTM #1 Oil | -1.0 | % | |
| 100% Strain, 150°C, 168 hr, in ASTM #1 Oil | 6.0 | % | |
| 150°C, 168 hr, in SF105 Oil | -16 | % | |
| 100% Strain, 150°C, 168 hr, in SF105 Oil | -14 | % | |
| 150°C, 1008 hr, in Dexron® III ATF | -10 | % | |
| 100% Strain, 150°C, 1008 hr, in Dexron® III ATF | 12 | % | |
| 150°C, 1008 hr, in IRM 903 Oil | -41 | % | |
| 100% Strain, 150°C, 1008 hr, in IRM 903 Oil | -12 | % | |
| 150°C, 1008 hr, in SF105 Oil | -24 | % | |
| 100% Strain, 150°C, 1008 hr, in SF105 Oil | -11 | % | |
| Change in Ultimate Elongation | ASTM D471 | ||
| 150°C, 168 hr, in ASTM #1 Oil | -10 | % | |
| 150°C, 168 hr, in SF105 Oil | -10 | % | |
| 150°C, 1008 hr, in Dexron® III ATF | -18 | % | |
| 150°C, 1008 hr, in IRM 903 Oil | -31 | % | |
| 150°C, 1008 hr, in SF105 Oil | -20 | % | |
| Change in Durometer Hardness | ASTM D471 | ||
| 150°C, 168 hr, in ASTM #1 Oil | 2.0 | ||
| Shore A, 150°C, 168 hr, in SF105 Oil | -8.0 | ||
| 150°C, 1008 hr, in Dexron® III ATF | 0.0 | ||
| Shore A, 150°C, 1008 hr, in IRM 903 Oil | -16 | ||
| Shore A, 150°C, 1008 hr, in SF105 Oil | -8.0 | ||
| Change in Volume | ASTM D471 | ||
| 150°C, 168 hr, in ASTM Oil #1 | 4.0 | % | |
| 150°C, 168 hr, in SF105 Oil | 19 | % | |
| 150°C, 1008 hr, in Clorox, 10% | 16 | % | |
| 150°C, 1008 hr, in IRM 903 Oil | 44 | % | |
| 150°C, 1008 hr, in SF105 Oil | 21 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -29.0 | °C | ASTM D3418 |
| Note Message | |
|---|---|
| 1 . | 20 mins/0.5 degree arc |
| 2 . | Cured Properties (10 min. at 180°C) |
| 3 . | Cured Properties (10 min. at 180°C) |
| 4 . | Cured Properties (10 min. at 180°C) |
| 5 . | Cured Properties (10 min. at 180°C) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8299-80 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| SureSpec LD20-002 | Genesis Polymers | LDPE | SureSpec |
| Daplen™ EH227AE | Borealis AG | TPO | Daplen™ |
| XYLEX™ X5230 resin | SABIC Innovative Plastics Asia Pacific | PC+PET | XYLEX™ |
| Elastocon® 3390 | Elastocon TPE Technologies | TPE | Elastocon® |
