Order Products : sales@su-jiao.com
Premier PI160K
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Premier Polymers, LLC. |
| Trademark: | Premier |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | weKR4L_Premier-PI160K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Premier PI160K is an impact copolymer polypropylene that exhibits high flexibility and strength. The resin is considered "No break." Meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 17 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 19.3 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 7.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 965 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | No Break | ASTM D256 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKNIFLEX® MED 3014-0200 | Tekni-Films, a div of Tekni-Plex | Film, PP | TEKNIFLEX® MED |
| Tarnoform® 500 GF6 | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| Nylene® 203 C UV | Custom Resins Group | Nylon 6 | Nylene® |
| Braskem PE HDE0960 | Braskem IDESA | HDPE | Braskem PE |
| Neoflex™ 8058 | Zylog Plastalloys Pvt. Ltd. | TPE | Neoflex™ |
