| Processing
Besides its main function as a wear additive, Algoflon® L206 can be used at low concentration to improve mold release properties.
Internal or open mixers (e.g. Banbury or two-roll mixers) are normally used to allow a good distribution of Algoflon® L206 in the elastomeric compound. Typically 5 to 15 % can be added to elastomeric compounds to achieve the desired properties. Additional fillers are normally included with Algoflon® L micronized PTFE during the blending process. The resulting elastomeric composition can then be processed under normal conditions.
Storage and Handling
The usual precautions for safe storage and handling of Algoflon® L206 should be taken according to material safety documentation and experience. There will be no chemical deterioration of the Algoflon® L206 during proper storage.
Shelf life of Algoflon® L206 micronized powders will vary depending upon whether the recommended storage conditions are maintained and whether the material remains free from foreign contamination during storage time (not exposed to dirt, dust, water or other chemicals). The material should remain sealed in the original containers and storage conditions should provide for protection from temperature extremes as well as rain, snow or other wet environments (or such conditions which may damage the storage containers in which the product is stored).
Safety and Toxicology
Before using PTFE Algoflon® L micronized powders consult the product Material Safety Data Sheet and follow all label directions and handling precautions.
As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Vapor extractor units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with soap and water. In case of eye contact flush with water immediately and seek medical help. Do not smoke in areas contaminated with powder, vapor or fumes. See Material Safety Data Sheet for detailed advice on waste disposal methods.
Packaging
Algoflon® L206 is packaged in 20 kg non returnable drums. Each drum has one bag liner made of polyethylene resin. |
