Order Products : sales@su-jiao.com
Kazan LDPE 16214-020 OKP 22 111 3403
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Kazanorgsintez Joint Stock Company |
| Trademark: | Kazan LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | wcUml8_Kazan-LDPE-16214-020-OKP-22-111-3403.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GOST / TU: GOST 16337-77 LDPE is produced by means of polymerization of ethyiene under high pressure in tubular or stirred reactorwith the use of radical type initiator. LDPE is used for manufacturing of pipes, fittings, articles contacting with food, toys, films etc. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.921 to 0.925 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | |
| Melt Flow - Dispersin within a batch 1 | < 15 | % |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Number of Inclusions | > 30.0 | ||
| Odor Rating | < 1.00 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress | |||
| Yield | > 110 | MPa | |
| Break | > 115 | MPa | |
| Tensile Strain (Break) | > 600 | % |
| Note Message | |
|---|---|
| 1 . | ± |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ASTALAC™ ASA 307 | Marplex Australia Pty. Ltd. | ASA | ASTALAC™ |
| Gallonprene® GP200-40Q | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Lucky Enpla LPC1006SG | Lucky Enpla Co LTD | PC | Lucky Enpla |
| Sylvin 8980-90 White 1588 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| LNP™ THERMOTUF™ WF006I compound | SABIC Innovative Plastics | PBT | LNP™ THERMOTUF™ |
